Cadac Safire Heater JET NO32

Cadac Safire heater Jet no32 is ideal to use on the Safire heater. The gas consumption is based on the appliance being run at full rate laboratory conditions from its recommended refillable LPG cylinder until gas is exhausted. Jet has a high light output with silent operation while the filter jet prevents constant jet blocking. All jets are appliance specific so ensure you buy the correct size jet for your appliance. Stargas professionals can install your jets safely at your convivence if you are unsure as to how the jet needs to be installed or if you do not have the correct tool for the job. NOTE- Do not over tighten the jet as the thread strips easily. Benefits Less pain for animal Time saving Greater comfort for the farmer Respects Animal Welfare Can be used in freezing weather panels. Special features designed with a knurled shank that can be pressed into a drilled hole. The shank grips the board with an interference fit by broaching its way into the panel as it is squeezed into the holes. broach nut fasteners are designed for unplanted through-holes. When installed in plated through-holes, a hole tolerance of +.005 – .001 in. (+.13 – .03 mm) should be used. When used in plated through-holes, performance will be reduced, and plating may be damaged by knurl.